SZS Gas Fired Hot Water Boiler

SZS Gas Fired Hot Water Boiler

SZS gas hot water boiler is a new type of boiler which has been developed by our company on the basis of the mature technology of domestic gas hot water boiler. The structure and performance are in the leading level in China.

  1. Capacity:7-70 MW.
  2. Working pressure:1 - 1.6 Mpa .
  3. Working temperature:150/130 degree, 90/70 degree.
  4. Applicable fuels: Natural gas, coke oven gas, blast furnace gas, carbon black tail gas, biogas and methanol..
  5. Application Industry: Heating, hospital, University .
SZS Gas Fired Hot Water Boiler

Manufacturing Process Characteristics Of SZS

  1. 1, all sides of the membrane between the boiler and the boiler barrel are sealed by comb type boards, thus preventing the leakage of condensate and gas from the sealing of refractory concrete.
  2. 2, the larger hearth, with low emission burner, Nox is as low as 30mg/Nm3.
  3. 3, internal insulation measures are adopted at flue gas outlets of flue and boiler, which effectively reduce noise in boiler operation.
  4. 4, Using high quality aluminum silicate fiber and refractory mortar, the temperature of the furnace is controlled below 45 degrees, effectively controlling the heat loss.
  5. 5, The manhole is arranged on the front and bottom of the boiler, and the check door is arranged at the rear of the boiler, which is convenient to open, and is convenient for users to overhaul and clean up internal and external parts.
  6. 6,The front and back walls of the boiler body are all made of membrane structure, which greatly improves the service life of the front and back walls and ensures the service life of more than 20 years.

Model Parameters Of SZS Gas Fired Hot Water Boiler

The SZS series boilers are composed of Double pot, longitudinal and room burning D type, the right side is the hearth, the left is a convective tube bundle, and the movable support through the middle and both ends of the lower pot is fixed on the body chassis, and the boiler is expanded to both ends.

The furnace is surrounded by a narrow tube membrane water cooling wall, and the membrane type water wall on the left side of the furnace is completely sealed off the furnace with a convective tube. The back of the convective tube area is a staggered structure, the front part is a sequence structure. The smoke produced by the furnace chamber comes from the smoke outlet of the furnace tail into the burning chamber and the convection tube zone, and then from the boiler The left front part is turned into the spiral fin tube energy economizer and condenser, and finally enters the flue into the chimney and exhausting into the atmosphere.

Boiler Model Rated Thermal Power(MW) Rated Working Pressure(MPa) Rated Outlet Water Temperature (℃) Rated Intake Temperature (℃)
SZS7-1.0/115/70-Q 7 1 115 70
SZS10.5-1.0/115/70-Q 10.5 1 115 70
SZS14-1.25/115/70-Q 14 1.25 115 70
SZS17.5-1.25/115/70-Q 17.5 1.25 115 70
SZS21-1.25/130/70-Q 21 1.25 130 70
SZS29-1.25/130/70-Q 29 1.25 130 70
SZS46-1.6/130/70-Q 46 1.6 130 70
SZS58-1.6/130/70-Q 58 1.6 130 70
SZS70-1.6/130/70-Q 70 1.6 130 70
SZS116-1.6/130/70-Q 116 1.6 130 70

Factory Equipment

In order to build first-class industrial boiler products, the company's production workshops all adopt internationally advanced large-scale cross-span steel structure workshops, covering an area of 120,000 square meters, with good lighting and reasonable layout.

Get Price And Support

Fill in this form or click the service online, all questions will be answered.

About us

Zozen after years of rapid development, and actively promote the innovation technology, quality management, standardize the operation of service mode, and in the industry took the lead in the establishment of Computing center and local network, the full implementation of computerized information management.

Read More

Company News

Wuxi Zozen has now become one of the most comprehensive large-scale boiler equipment companies in the industry.